crotchrocket
New Member
- Posts
- 4
Hi All,
Cruising out of London on the A2 at 50 with cruise control on. Gear changed down, rev's increased and when I looked down the M and S lights were flashing. Gearbox had gone into limp mode. Pulled over, switched off, went thrugh gears and it persisted. Plugged in the Nanocom i had with me:
Fault Code P0753
SOLENOID VALVE 1 MONITORING
(S/C TO GROUNDOR 0/C)
Cleared the fault code and it imediately appeared everytime i selected a forward gear. even left it for 10 mins. Still did the same. Driving home carefully valve 1 was off.
Got home, got changed and had a look under it, to see what cabling I could and check something hadn't caused a wiring issue. Nothing. Cleared the fault agian the the gearbox has worked fine since (about 40 miles)
Any thoughts??
Cruising out of London on the A2 at 50 with cruise control on. Gear changed down, rev's increased and when I looked down the M and S lights were flashing. Gearbox had gone into limp mode. Pulled over, switched off, went thrugh gears and it persisted. Plugged in the Nanocom i had with me:
Fault Code P0753
SOLENOID VALVE 1 MONITORING
(S/C TO GROUNDOR 0/C)
Cleared the fault code and it imediately appeared everytime i selected a forward gear. even left it for 10 mins. Still did the same. Driving home carefully valve 1 was off.
Got home, got changed and had a look under it, to see what cabling I could and check something hadn't caused a wiring issue. Nothing. Cleared the fault agian the the gearbox has worked fine since (about 40 miles)
Any thoughts??