D1 abs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Jackstar

Active Member
Full Member
Posts
52
Location
Kent, Romney Marsh
Hi, I've got the abs light on, I does go out with a drive.

I've done the sequence to diagnose the fault but I'm getting a funny flash pattern.

 
That video above is during a flash/bleep test.
In normal dad to day, the light illuminates then goes out and comes back on, to me that says it's done it's checks and found a fault? Then as I said above it'll go out after a mile or two.
Is that normal?
 
It's a good few years since I had a D1 and I can't remember the exact sequence of lights but IMO the light will stay on until it is happy that all the ABS components are working (including wheel speed sensors).
If the light stays on for a mile or 2 then I guess you have a problem, unless you are a very slow driver :D
 
That video above is during a flash/bleep test.
In normal dad to day, the light illuminates then goes out and comes back on, to me that says it's done it's checks and found a fault? Then as I said above it'll go out after a mile or two.
Is that normal?

Oh and you said it goes out, not that it takes a mile or 2. :)
 
Just read the owners manual, it would appear that I'm trying to find a fault which doesn't exist

o6lHt6X.jpg


Not had the D1 for long and the last mot failed on the abs being on so I assumed there was a fault, but I was wrong.

Thanks @backinblack
 
Back
Top