bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Cyclone breather.
This is a really easy job to do.
Mines was a bit oily so decided to give it a clean. Here's how ah did it...
First ah slackened off the jubilee clips and removed the top pipe...
then undid the 8mm bolt holding it on...
pulled it out and wiggled it free from the bottom hose...
Then filled it with some heating oil and gave it a good shakin' a couple of times to get the muck out..
then refitted it in reverse order.
(Ye might want to check the condition of the o-ring before refitting)
That's it, job done
This is a really easy job to do.
Mines was a bit oily so decided to give it a clean. Here's how ah did it...
First ah slackened off the jubilee clips and removed the top pipe...
then undid the 8mm bolt holding it on...
pulled it out and wiggled it free from the bottom hose...
Then filled it with some heating oil and gave it a good shakin' a couple of times to get the muck out..
then refitted it in reverse order.
(Ye might want to check the condition of the o-ring before refitting)
That's it, job done
