1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

cut out switch

Discussion in 'Range Rover' started by mozz smith, Apr 23, 2019.

< Previous Thread | Next Thread >
  1. mozz smith

    mozz smith Well-Known Member

    Joined:
    Aug 19, 2010
    Posts:
    1,563
    Likes Received:
    93
    Location:
    tameside manchester
    Hi fellas , can anyone show a picture of the cut out switch on a 2.5 p38 2000 diesel and also does it press down for off and up for on ???? please , does it just pull up or what , thanxs Mozz
     
  2. mozz smith

    mozz smith Well-Known Member

    Joined:
    Aug 19, 2010
    Posts:
    1,563
    Likes Received:
    93
    Location:
    tameside manchester
    hi again ,is the above known as the inertia switch " fuel cut-off " ?????
     
    Grrrrrr likes this.
  3. Henry_b

    Henry_b Well-Known Member

    Joined:
    Jan 29, 2018
    Posts:
    6,014
    Likes Received:
    4,063
    Location:
    Me Special "Lab"
    Its behind a plastic panel to the right of the accelerator.. ;)
     
  4. Henry_b

    Henry_b Well-Known Member

    Joined:
    Jan 29, 2018
    Posts:
    6,014
    Likes Received:
    4,063
    Location:
    Me Special "Lab"
    Here
    >> [​IMG]
     
  5. marjon

    marjon Well-Known Member

    Joined:
    Jul 15, 2018
    Posts:
    2,823
    Likes Received:
    2,188
    Location:
    Bulgaria
    I was also under the impression that it should give a message on screen if switch had been tripped.
    Push to reset.

    Luckily never had to find out if it works:) in an impact it’s also supposed to pop the doors open and turn on hazards.

    Or are you referring to a stop solenoid for a diesel? (If so cant help sorry)

    J
     
    RangeRoller dt likes this.
  6. wammers

    wammers STILL BREATHING. Donater

    Joined:
    Oct 19, 2008
    Posts:
    54,483
    Likes Received:
    9,092
    Location:
    Preston Lancs.
    Inertia switch is behind plastic panel at base of drivers A post. Passenger A post LHD. If tripped can be reset by pushing button in. It cuts supple of power to lift pump in case of a collision. But can get corroded contacts and cause lift pump not to work. If lift pump is working switch is fine. Fuel cut off solenoid is on injection pump. Fuel is cut off when it is dropped and on when it is lifted. It should click when ignition is turned on.
     
    Last edited: Apr 23, 2019
    RangeRoller dt likes this.
  7. Datatek

    Datatek Well-Known Member

    Joined:
    Feb 5, 2009
    Posts:
    32,455
    Likes Received:
    1,627
    Location:
    Near Poitiers SW France
    You sure it pops the doors and turns on the hazards?
     
  8. marjon

    marjon Well-Known Member

    Joined:
    Jul 15, 2018
    Posts:
    2,823
    Likes Received:
    2,188
    Location:
    Bulgaria
    According the owner manual I have yes.

    7DDA2DBE-2912-4537-A079-1EE98CF5B6C7.png

    J

    Edit : maybe I should have said pops door locks open:oops:
     
    Last edited: Apr 23, 2019
< Previous Thread | Next Thread >