Crunching reverse on LT77...

jmattley · Oct 31, 2009

Been like it for a while now and it's starting to **** me off. Every time I put my 93 200tdi in reverse it goes, crunch quite badly when engaging the gear.
Is this a sign my gear box is on it's way out or what?

Cheers guys!

fanatic · Oct 31, 2009

clutch as no syncro on reverse on 99% of all gearboxes.

ratty · Oct 31, 2009

try going into 3rd or 4th before going into reverse. This should help.

si844 · Nov 1, 2009

ratty said:
try going into 3rd or 4th before going into reverse. This should help.

how does that help? im having this problem too

ratty · Nov 2, 2009

si844 said:
how does that help? im having this problem too

The reverse gear is a crash gear with no syncromesh. By selecting another gear before reverse you stop the shaft spinning thus preventing the crunching.

If it still crunches even if you select another gear first it means that you have a problem and the clutch is not clearing. This could be caused by a damaged pressure plate or the plate is sticking on the splines on the shaft and therefore is rubbing on the flywheel.

200tdi ayre · Nov 2, 2009

i have the same problem and when i rev then release the accelerator then rev a few times something clunks underneath each time :s

Crunching reverse on LT77...

jmattley

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

ratty

I'm not special I'm limited edition

si844

New Member

ratty

I'm not special I'm limited edition

200tdi ayre

Well-Known Member

Similar threads