cruise control

metropolis2 · Feb 12, 2010

Hi i have a problem with my cruise control the light on the dash comes on but it does not work i have checked the pipes on the vacum and they are all ok any other things i should look at ? , it did work but just stopped. ps its a p38 1999 4.6 hse

robp38 · Feb 12, 2010

some else mentioned the pick up ring for the steering wheel when his went kaput

kooky_guy · Feb 12, 2010

There's quite a detailed troubleshooting section in Rave for the cruise control. Must run through it myself sometime - mine's never worked.

Quite how LR managed to come up with such an unreliable and crap system at the time the P38 was out is beyond me. The one in my last Vectra was fantastic and that didn't rely on stupid antiquated vacuum pipes etc. Mind you, even the heated seats still worked when I sold that. Fat chance with a RR.

richwp · Feb 12, 2010

When mine died, the t-piece which joins the vacuum pipes had a crack in it - possibly the result of a previous fix as they can get quite brittle with age.

Irishrover · Feb 12, 2010

As has been posted..go through the detailed troubleshooting guide on RAVE, otherwise your just guessing and wasting time & effort

gavbriggs · Feb 12, 2010

Clean the plug under the vac pump n it should bust into life

cruise control

metropolis2

Active Member

robp38

Well-Known Member

kooky_guy

Well-Known Member

richwp

New Member

Irishrover

Well-Known Member

gavbriggs

Well-Known Member

Similar threads