creaking when cornering
- Thread starter cfc123
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 46,324
- Location
- Near Poitiers SW France
CV joint.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Could be data but that's more of a clonk noise than a creak , I'm serious 
could be steering pump?
could be steering pump?
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,031
- Location
- Buckinghamshire, UK. ('95 DT)
How about the ball-joints and steering damper?
Can you get someone to move the steering while you have a good look from underneath?
Can you get someone to move the steering while you have a good look from underneath?
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,031
- Location
- Buckinghamshire, UK. ('95 DT)
Busy man!
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
pleased you said about the clonk as the front passenger side clonks when i go over speed bumps and have looked all over the under side but cannot find the prob how do you check for a fubard C.V
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
pleased you said about the clonk as the front passenger side clonks when i go over speed bumps and have looked all over the under side but cannot find the prob how do you check for a fubard C.V
If its bumps sounds like a shocker or similar to check cv go to a car park drive in a circle on full lock both ways if its bad your hear it clonking
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
cheers dude
Hi, there, When you say, could be data. what exactly do you mean?. Cheers, AndyCould be data but that's more of a clonk noise than a creak , I'm serious
- Posts
- 58,170
- Location
- Preston Lancs.
pleased you said about the clonk as the front passenger side clonks when i go over speed bumps and have looked all over the under side but cannot find the prob how do you check for a fubard C.V
Anti roll bar link.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
I mean excacly that it could be that what data suggested or pump on full lock
Just inspect all things associated with steering someone turns it for you you get under there and take a closer look at every thing quiet simple .
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
both changed wammers
- Posts
- 58,170
- Location
- Preston Lancs.
If you get a knock over speed bumps it can really only be that or a shocker.
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
brand new shocks
- Posts
- 58,170
- Location
- Preston Lancs.
Running out of options then. There has to be something loose under there. Not something bouncing around in the spare wheel well i suppose?
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
