DiscoJa
Member
- Posts
- 80
- Location
- Peterborough
Hi, Im new to the site after purchasing my first ever land rover, "L reg 200 tdi auto" When I first start it up there is a continual drip of water coming from what appears to be a large plate behhind the water pump, after 2 or 3 minutes of running the dripping stops, Any ideas, of the problem and how to fix it, is this a usual thing for a land rover???
Also the temperature gauge sits just below half way on a 60 mile run, is this usual? where is the max water mark on the header tank? My header tank is about half full.
Not being used to the land rovers I took the cap of the header tank to check the water levels as the car was running (stupid I know) but it appeared to bubble up, I take it that its pressurised, even though it only has a plastic cap and not a pressure cap as seen on many cars?
Hope you understand this and are able to help in my hour of need.
Jason
Also the temperature gauge sits just below half way on a 60 mile run, is this usual? where is the max water mark on the header tank? My header tank is about half full.
Not being used to the land rovers I took the cap of the header tank to check the water levels as the car was running (stupid I know) but it appeared to bubble up, I take it that its pressurised, even though it only has a plastic cap and not a pressure cap as seen on many cars?
Hope you understand this and are able to help in my hour of need.
Jason