P38A coolant loss

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

funrover

Active Member
Posts
276
Location
Camrose - Haverfordwest
Ahh the dreaded coolant loss!

First of all there is no smoke, water in the oil or overheating it just seems to be disappering slowly!

One thing i've noticed is if i release the expansion tank cap after a drive the coolant will rise.

The engine doesn't knock or run badly there is plenty of power!

Just at a loss tbf! :confused:
 
Oh i did the matrix o rings a few weeks ago no leaks from there.
I did my matrix o rings... twice.. turns out it was the matrix core..

that was the month after I did my HG because number 7 was leaking into the chamber..

if you want to see if its the HG, pull all the plugs out.. if the HG has gone, you'll see a steam cleaned spark plug
 
I thought throttle body ,but he never said what engine ....Throw some stop leak in it :rolleyes:,Wont seal a water pump or metal parts but will on rad ect .Doint use that copper stuff it sits in the water bottle ,showing the world uv used it ......:)
 
I thought throttle body ,but he never said what engine ....Throw some stop leak in it :rolleyes:,Wont seal a water pump or metal parts but will on rad ect .Doint use that copper stuff it sits in the water bottle ,showing the world uv used it ......:)
He said lots of power so I assumed he wasn't talking about the doozle!! (now hiding behind sofa!!) :p:Do_O
 
Back
Top