confused

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

a.smith

New Member
Posts
4
Location
manchester
hi i am not quite sure wot my problem is but i have water spraying out of what looks like the side of the engine just under the turbo, the car is not overheating and everything else looks ok dont no if its anything to worry about please help me.... i have a landrover discovery tdi 1998 :)
 
hi i am not quite sure wot my problem is but i have water spraying out of what looks like the side of the engine just under the turbo, the car is not overheating and everything else looks ok dont no if its anything to worry about please help me.... i have a landrover discovery tdi 1998 :)

Your not supposed to post hear but never mind......core plug is pretty easy to replace.
The easiest way to remove one is to drill a small hole through its centre (very sharp drill so all the swarf comes out) and using a small bar or screwdriver in the hole lever to one side.....as the centre of the plug bends it will come loose.

Putting a new one in use a socket that fits inside the rim of the plug nicely and tap it in, keeping it nice and square as it goes in. Dont tap it in too far, just so the rim is level with the block.
 
Back
Top