cold start light
- Thread starter woo0003
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bobsticle
De Villes Advocaat
- Posts
- 26,442
- Location
- Manchester
At best the light is very dim. It should be a 6v not a 12 and check the earth. Dash earths are poor at best. Then again it could have simply blown.
Bobsticle
De Villes Advocaat
- Posts
- 26,442
- Location
- Manchester
Oh, and in case your not accustomed. The heater plugs are manual.
Key in….
Ignition on…..
Heater plugs on… and hold for 10to20 seconds…..
Fire it up.
Key in….
Ignition on…..
Heater plugs on… and hold for 10to20 seconds…..
Fire it up.
steve2286w
Well-Known Member
- Posts
- 4,070
- Location
- monkeyangerland
The bulb is no 15 and you might be able to measure continuity across the thin wires at ballast resistor to see if it’s blown, have you the original wired in series pigtails or newer parallel heater plugs
