omlaysause
New Member
- Posts
- 41
Okay doke.
Here are the next set of questions for the 109.
Fitted the steering bearing and everythings a lot better now in relation to play (still ned to check the steering box). But while I was waiting on the steering bearing I thought I'd tidy up the wiring because dash lights were working, gauges etc.
Anyway all the lights are now working, including the cold start light but doesn't want to go out! Any suggestions?
Also still getting nothing from the fuel and water gauges (they do work, put a battery on them and they move) Is there a quick way of checking where the fault lies, fuel sender, thermostat etc? Also no power seems to be coming though to them either. Is it okay to take a power feed from another wire?
Also with this being an ex MOD, there aren't any back seats and just the wooden socket where the seat is made up (I know this is a crap descripton ...... but basically you slot various bits of wood in to make up the frame, with 2 large belts bolted to the boxes to strap across). So the question is what bench seat and frame (if any) do I use/buy or do I simply scrap this setup and bolt seats to the side boxes?
Do you see the pattern, after each weekend a new set of questions appear!
Cheers in advance. :lvkiss-106:
Here are the next set of questions for the 109.
Fitted the steering bearing and everythings a lot better now in relation to play (still ned to check the steering box). But while I was waiting on the steering bearing I thought I'd tidy up the wiring because dash lights were working, gauges etc.
Anyway all the lights are now working, including the cold start light but doesn't want to go out! Any suggestions?
Also still getting nothing from the fuel and water gauges (they do work, put a battery on them and they move) Is there a quick way of checking where the fault lies, fuel sender, thermostat etc? Also no power seems to be coming though to them either. Is it okay to take a power feed from another wire?
Also with this being an ex MOD, there aren't any back seats and just the wooden socket where the seat is made up (I know this is a crap descripton ...... but basically you slot various bits of wood in to make up the frame, with 2 large belts bolted to the boxes to strap across). So the question is what bench seat and frame (if any) do I use/buy or do I simply scrap this setup and bolt seats to the side boxes?
Do you see the pattern, after each weekend a new set of questions appear!
Cheers in advance. :lvkiss-106:
