clutch woes.. think this is gonna be expensive!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
presumably its been in a while ,bearing doesnt look siezed ,carrier looks fine just fork is broken .slippers cant come off unless fork breaks ,not common but i have seen it before,some vary in quality
 
jamesmartin said:
presumably its been in a while ,bearing doesnt look siezed ,carrier looks fine just fork is broken .slippers cant come off unless fork breaks ,not common but i have seen it before,some vary in quality
Click to expand...


bearing not siezed, a little lumpy but is mis-shaped due to the fork hitting it, i think..

thanks... so hopefully new thrust bearing and jobs a good un...
 
slipper pads are the lozenge shaped bits ,yes groove matters as will give uneven surface for new bearing to run on ,and eventually groove cut fingers to the point bearing goes through them ,anything more than slight id change it
 
cheers james and everyone else for advice... will have a look tmos and looks like new clutch... plate, cover and bearing...

local place wants £120 for kit.. that sound reasonable?

seen em on e blag for £60...
 
thanks for all the advice..

off to bed.. gonna be up early in mornin to have a look at cover before i go to work...

thanks again for stickin with me and this thread...
 
if you get a clutch kit sorted nick, i can give you a push back on with it on sunday if that's any help?
 
You must log in or register to reply here.

Similar threads

L
Clutch Pedal 300tdi 97
Replies
16
Views
1K
Hicap phill
H
N
Clutch problem unable to change gear
Replies
10
Views
2K
Anaconda
A
P
Freelander 1 td4 2006 clutch master cylinder.
Replies
6
Views
891
pdpjpr
P
P
Clutch stuck 300 tdi
Replies
13
Views
2K
portokali
P
Cornishdefender
Clutch pedal travel suddenly changed - now bite point in last 2 inches towards floor
Replies
4
Views
1K
Cornishdefender
Cornishdefender
Back
Top