Clutch Troule

Having trouble with my clutch, Iv reconed the marster cylinder, Done all the nessesery bleeding but the clutch pedal is still stuck to the floor. Im thinking this is going to cost me

vehicle?

disco 300. 1995

it needs back bleeding theres still air in the system get an old oil can ( a pump one ) fill it with brake fluid snip the end off and put it on the bleed nipple on the slave cylinder and pump away

its far easier to bleed a clutch this way as air tends to go up rather than down with normal bleeding

thrust bearing collapse or clutch fork punched thru.
edit. ignore my post atm
edit again. stuck to the floor as in not returning or just nowt there when you press it?

w4lk3r said:

Having trouble with my clutch, Iv reconed the marster cylinder, Done all the nessesery bleeding but the clutch pedal is still stuck to the floor. Im thinking this is going to cost me

Click to expand...

reconed the marster cylinder buy a new one

Thanx for the reply guys, If thers a chance it's going to save me a few quid ill give the back bleed a go first. Iv not heard of it being done that way before so ill give it a go and see what happens.