currymunster
Well-Known Member
- Posts
- 789
- Location
- Folkestone, Kent.
Man of experience by the looks of your user name:lol:
Does that mean you play tents at night???
clutch slave push rod stuck
- Thread starter Simba9
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Man of experience by the looks of your user name:lol:
Does that mean you play tents at night???
currymunster
Well-Known Member
- Posts
- 789
- Location
- Folkestone, Kent.
Okay where's the punch line?????
Or do ya really make tents??
Or do ya really make tents??
currymunster
Well-Known Member
- Posts
- 789
- Location
- Folkestone, Kent.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
free a mate repairs them for me ,just takes a little longer ,kids foot broke screen on one and kids had removed some drivers apparently from the in an attempt to make space for mine craft
Landy-ads
Active Member
- Posts
- 407
- Location
- Out the front, spanner in hand
As James says they are not a tight fit. IIRC there is a strong spring inside the slave that keeps the piston pushed out so when you fit the slave you should feel resistance against the pushrod as push it in and once bolted up the whole piston/rod/fork setup should be tight inside.
Bleeding is simple so long as you have the bleed nipple on the top outlet, if its a LT77 box best to remove the exhaust downpipe to gain better access and avoid excessive use of 4 letter expletives.....
