CHRIS HILL
Active Member
- Posts
- 114
- Location
- CHESTERFIELD
Hello all. I am replacing the clutch on a TD5 discovery. Whats the best way to do this? I have a set of high ramps and a gearbox jack. Thanks
Clutch replacement
- Thread starter CHRIS HILL
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 48,067
- Location
- East Dorset
Do you have an engine crane?
If so, in through the passenger side door to take the weight of the gaerbox.
But you may actually find it easier to take the engine out.
If so, in through the passenger side door to take the weight of the gaerbox.
But you may actually find it easier to take the engine out.
CHRIS HILL
Active Member
- Posts
- 114
- Location
- CHESTERFIELD
Hello. No havent got a engine crane or any way of lifting the engine. Cheers
- Posts
- 48,067
- Location
- East Dorset
I bet there are threads on here about it, if not elsewhere on the net.
But one thing I have heard is that it is better to take the transfer box off first as it is heavy and awkward. Do you have a second pair of hands to help? That is more or less essential. Well maybe only for an automatic.
The member on here that I asked about it sadly no longer contributes, but he told me to jack up one side and use an engine crane to hold it then lower it. Balancing it on a normal jack is asking for trouble. But that was with mine which is auto.
So how high are your high ramps?
I'll try and do a search to help you.
But one thing I have heard is that it is better to take the transfer box off first as it is heavy and awkward. Do you have a second pair of hands to help? That is more or less essential. Well maybe only for an automatic.
The member on here that I asked about it sadly no longer contributes, but he told me to jack up one side and use an engine crane to hold it then lower it. Balancing it on a normal jack is asking for trouble. But that was with mine which is auto.
So how high are your high ramps?
I'll try and do a search to help you.
- Posts
- 48,067
- Location
- East Dorset
Here's how Rimmers do it.
- Posts
- 48,067
- Location
- East Dorset
Have to say the Rimmer YouTube, almost does little more than list was has to be done.
As with SOOOO many youtubes, it skims over the difficult bits that you really need help with.
Maybe a better link to a better article, forum thread or another Utube can be found.
I expect OP has already done this anyway.
As with SOOOO many youtubes, it skims over the difficult bits that you really need help with.
Maybe a better link to a better article, forum thread or another Utube can be found.
I expect OP has already done this anyway.
CHRIS HILL
Active Member
- Posts
- 114
- Location
- CHESTERFIELD
Hello. The ramps are 1200mm high. I have made the transmission jack adapter to fit the gearbox.i have searched online but a lot of the information is very vauge. Cheers
