clutch fork plastic clip

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gotoneatlast

gotoneatlast

New Member
Posts
3,431
Location
berkshire,uk
Does any one know what the little, staple looking like, clip on the bottom of the clutch fork for an r380 gbox is for, and how it fits, its seems really poxy, and i can't see the point, and i'm fiddling with it now, and it seems(seems!!?..whatTF am i talking about.. it does?!?!!)to drop out, am i fitting it incorrectly to the release bearing?
 
gotoneatlast said:
Does any one know what the little, staple looking like, clip on the bottom of the clutch fork for an r380 gbox is for, and how it fits, its seems really poxy, and i can't see the point, and i'm fiddling with it now, and it seems(seems!!?..whatTF am i talking about.. it does?!?!!)to drop out, am i fitting it incorrectly to the release bearing?
Click to expand...


Are you on about the clip that holds the slave cylinder pushrod to the clutch fork?
 
No,
thats okay, ithink thats called a spigot bush? not sure but i worked that out ok,
the clip i'm on about is at the thrust bearing endat the base of the fork, i'm guessing it holds the bearing on to the little oval pads on the fork, but it really is poxy or i've not got it fitted right.
 
yeah it is flimsy, i actualy bought another because i was convinced there should be two, until I tried to fit it....:confused:

yes it at the oval, you will see a small hole in the fork and one in the thrust plastic. Just clip them together, but if you cant or dont..... so what?, I cant see its going to make a scrap of difference....;)
 
martinl said:
yeah it is flimsy, i actualy bought another because i was convinced there should be two, until I tried to fit it....:confused:

yes it at the oval, you will see a small hole in the fork and one in the thrust plastic. Just clip them together, but if you cant or dont..... so what?, I cant see its going to make a scrap of difference....;)
Click to expand...

''ss funny i sent me dad the the main dealers to get spares in preparation for me busting them, along with a new spigot bush clip thing that i did break, i got four now!!, and they all look as much use as tits on a kipper.
 
You must log in or register to reply here.

Similar threads

P
Clutch stuck 300 tdi
Replies
13
Views
839
portokali
P
D1Nut
D1 300 tdi g/box out
2
Replies
23
Views
2K
D1Nut
D1Nut
C
300TDI, clutch slave cyl, pushrod. dimensions
Replies
16
Views
926
Anaconda
A
N
Clutch problem unable to change gear
Replies
10
Views
625
Anaconda
A
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
2K
miktdish
miktdish
Back
Top