Clunking when putting auto into reverse and drive gears

AllGearNoIdea

New Member

Posts

2

Location

Kent

• Apr 11, 2021

• #1

Hi everyone, brand new on here and hope for some advise
We have a tray back with a 3.9 V8 auto in it and whenever we select reverse or drive gear it clunks going into it

driving is totally fine, just this big clunk every time we enter either D or R gears

does anyone know what this could be?

thanks

 

brianp38dse

Well-Known Member

Posts

20,093

Location

heathrow

• Apr 11, 2021

• #2

Hello and welcome

 

Hippo

Lord Hippo

Posts

53,945

• Apr 11, 2021

• #3

Welcome to the forum

Best to ask in the rr section:

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

 

DanClarke

Well-Known Member

Full Member

Posts

16,481

Location

Benfleet, Essex

• Apr 11, 2021

• #4

Hello & welcome.
UJ's all good?

 

discool

Well-Known Member

Posts

13,626

Location

Sector 12 in Kent, The Garden of England

• Apr 14, 2021

• #5

AllGearNoIdea said:

Hi everyone, brand new on here and hope for some advise
We have a tray back with a 3.9 V8 auto in it and whenever we select reverse or drive gear it clunks going into it

driving is totally fine, just this big clunk every time we enter either D or R gears

does anyone know what this could be?

thanks

Click to expand...

My RR and now the D1 transfer box clonks when selecting reverse, both vehicles purchased new, so thats 34 years so far of clonking which I understand disappeared when the later models were fitted with a different transfer box, But I would be concerned if it was happening when selecting D.

 

R

Ratae

Well-Known Member

Posts

3,272

• Apr 14, 2021

• #6

Idle rpm too high?