Clunking defender 90 axle swap?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I could be wrong and am happy to be corrected but I thought D2 axles were slightly longer than D1's. I'm sure I read that somewhere?!
 
alexc2701 said:
There's supposed to be alittle play in them like that, when you moved rear prop in that video it sounds like the handbrake is catching though
mine doesn't make any noise
Did you try with no props on? That'll be a good indicator of if box is okay, though some sounds only come out under load
Also is that oil on your handbrake drum? Might be rear seal on tbox and low oil
Click to expand...
When I bought the Defender a year ago, I done all fluids apart from diffs, tbox and gearbox, so possible could be that. I undone the pto cover today and no fluid came out (not sure if it's meant to) I'll upload a video of it now
 
SpaceDawg said:
Mine has some play in it, at very low speeds in traffic it sounds like yours when I slow and then move on, clunk. I got under it and twisted and played around with it but concluded there is some play anyway. However, when my rear diff started to play up it got very noisy so it was obvious there way and issue, easily replaced. Changing all the diffs over seems a little extreme, the only think I was worried about with mine was the input shafts to the transfer box, when I replaced the 1.4 ratio one to 1.2 disco box I checked them and they were ok. So I guess what I'm saying is unless its noisy don't be too worried about it. I like the clunk in town anyway.
Click to expand...
Thanks for the reply, it's a very loud rattle/ clunking when I come off the accelerator or when the clutch is in (turning off the road for example).

Just checked the input shaft and looks okay, maybe I'll check the diffs then!

I'll upload a video now of the pto cover removed.
 
This is the transfer pto cover removed to show the input shaft, looks okay, has the drumbrake got excessive movement?

No oil came out when I undid the cover?

Thanks for sticking with me!

 
Had a friend come and kindly look at it today, he's a mechanic and seems to think it's the transfer box.

Difflock works, however the power doesn't seem to be getting to the back wheels.

I'll keep you updated for anyone curious when I fix it :)

Anyone got a 200tdi transfer box for cheap near Essex/Suffolk border?
 
Josh999 said:
Had a friend come and kindly look at it today, he's a mechanic and seems to think it's the transfer box.

Difflock works, however the power doesn't seem to be getting to the back wheels.

I'll keep you updated for anyone curious when I fix it :)

Anyone got a 200tdi transfer box for cheap near Essex/Suffolk border?
Click to expand...
If it is the box they're easy and cheap on fleabay, could try drain the oil see what comes out if full of metal bingo lol did you try with both props off and just box spinning nothing? Then if noise still must be box
And no not excessive play but in the other videos when you moved back prop it sounded like the pad was catching the drum. Can't hear on that video tho
 
So I bought and fitted a new transfer box. The old transfer centre diff had failed on inspection.

New problem, it whines and sounds like it's in reverse. I filled it with 2L of EP90 Castrol Classic (green tin) as the box was a B reg. It poured out, but I thought they held a little more than 2L?

Any thoughts on my problem, still have a 'normal clunk' now:

Thanks in advance
 
You must log in or register to reply here.

Similar threads

M
90/ discovery front axle swapping
Replies
7
Views
1K
MrF
M
J
Defender 300 Tdi Engine Swap
Replies
4
Views
406
jer_300Tdi_90
J
B
muck in the frame
Replies
4
Views
439
lynall
L
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
452
MrF
M
R
2008 Defender 90 2.4 TDCi Puma cranks but won't fire?
Replies
3
Views
991
ragaz2304
R
Back
Top