Classic v8 Engine bay

K

kevseabass110

Member

Posts

87

• Mar 17, 2019

• #1

Is there anyone out there with a v8 vogue that could send me some pics of the engine bay specifically the inner arches. I need to re bolt all the
Bits on the arches, tanks, coil, abs etc etc. It means redrilling new holes . So good shots of those areas for reference would be much appreciated.

 

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #2

Would photos of an 1988 with a charcoal canister be of any help?

 

K

kevseabass110

Member

Posts

87

• Mar 17, 2019

• #3

Hi Doug
Thanks , It might well be useful. It was stupid really not taking any photos of before it was stripped. The problem is it’s been a while so my memory of exactly where everything goes has gone .

 

Western Slope Rover

Well-Known Member

Posts

4,073

Location

On a mesa

• Mar 17, 2019

• #4

I've got a 90 and a 92 4.2l that I can photograph when the sun comes up.

It's 6:30 am here. ​

 

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #5

I hope these help, let me know if you need some more.

 

Attachments

• 
  P1050743.JPG

  267.1 KB · Views: 130
• 
  P1050744.JPG

  117.2 KB · Views: 118
• 
  P1050745.JPG

  283.4 KB · Views: 75
• 
  P1050746.JPG

  165.6 KB · Views: 92
• 
  P1050749.JPG

  160.9 KB · Views: 97
• 
  P1050747.JPG

  206.4 KB · Views: 111

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #6

Here are some more.

 

Attachments

• 
  P1050749.JPG

  160.9 KB · Views: 99
• 
  P1050750.JPG

  117.9 KB · Views: 88
• 
  P1050751.JPG

  233.9 KB · Views: 67
• 
  P1050752.JPG

  204 KB · Views: 94
• 
  P1050754.JPG

  168.8 KB · Views: 74

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #7

And finally.

 

Attachments

• 
  P1050756.JPG

  182.7 KB · Views: 96
• 
  P1050757.JPG

  154.2 KB · Views: 87
• 
  P1050758.JPG

  152.7 KB · Views: 83

ukadamwest

Well-Known Member

Posts

2,990

Location

Surrey

• Mar 17, 2019

• #8

thanks for the prompt.. when I do the CSK i'll make a cardboard template and mark the holes

 

K

kevseabass110

Member

Posts

87

• Mar 17, 2019

• #9

That’s really useful Doug thank you. The windscreen washer bottle side seems to share all the same hardware, the drivers side where the abs is mounted however is very different. So I’ll need a bit more help on that if anyone can. Doug on mine there’s like a silver capacitor type thing attached to the coil by a wire is that mounted near the turret ?

 

K

kevseabass110

Member

Posts

87

• Mar 17, 2019

• #10

Western Slope Rover said:

I've got a 90 and a 92 4.2l that I can photograph when the sun comes up.

It's 6:30 am here. ​

Click to expand...

I appreciate any help, thank you

 

Western Slope Rover

Well-Known Member

Posts

4,073

Location

On a mesa

• Mar 17, 2019

• #11

Here are pics of the coil side of my '92 4.2 LSE

 

Attachments

• 
  20190317_103337.jpg

  266 KB · Views: 78
• 
  20190317_103408.jpg

  288.1 KB · Views: 71

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #12

kevseabass110 said:

Doug on mine there’s like a silver capacitor type thing attached to the coil by a wire is that mounted near the turret ?

Click to expand...

Mine is attached to the same bracket as the Airflow Meter, its to the right of the windscreen washer bottle in the photo.

Taking these photos has reminded how badly my engine bay needs cleaning.

 

D

dougc

Active Member

Posts

102

• Mar 17, 2019

• #13

I should have said to the left of the washer bottle.

 

K

kevseabass110

Member

Posts

87

• Mar 18, 2019

• #14

Western Slope Rover said:

Here are pics of the coil side of my '92 4.2 LSE

View attachment 172690 View attachment 172691

Click to expand...

Thank you very much !!!! Great help

 

K

kevseabass110

Member

Posts

87

• Mar 18, 2019

• #15

dougc said:

Mine is attached to the same bracket as the Airflow Meter, its to the right of the windscreen washer bottle in the photo.

Taking these photos has reminded how badly my engine bay needs cleaning.

Click to expand...

Thanks doug , great help and much appreciated !!