P
p
Guest
Just spent a satisfying evening replacing the steering box on my classic
Range Rover. Old box was flooding fluid from the output shaft seal. Quite
common I gather.
Everything came undone fairly easily and it all went back together ok too.
Man that thing is heavy though.
The moment of truth has not yet arrived though as I'm not sure what power
steering fluid to put in it. Should it be Dexron II or Dexron III ? Is there
any problem with mixing the two (I'm think here of the residue of old fluid
in the reservoir, pump and hoses)? Also, will I need to bleed the system in
any way?
Many Thanks in advance for replies.
Peter
Range Rover. Old box was flooding fluid from the output shaft seal. Quite
common I gather.
Everything came undone fairly easily and it all went back together ok too.
Man that thing is heavy though.
The moment of truth has not yet arrived though as I'm not sure what power
steering fluid to put in it. Should it be Dexron II or Dexron III ? Is there
any problem with mixing the two (I'm think here of the residue of old fluid
in the reservoir, pump and hoses)? Also, will I need to bleed the system in
any way?
Many Thanks in advance for replies.
Peter