Rimmers do individual seals in a strip whereas the famous Four product, at over twice the price, appears to have squared off top corners so I'm wondering which design is the best bet.
Sorry to start off the year with a return to an old post
I purchased the Rimmer variety & my local garage is happy to do the job but point out that it will be necessary to cut the 'grip' side of the trim at the top corners in order to bend the seal into an angle. Will doing this be detrimental to the sealing effect, ie induce wind noise. My own thoughts are, can this be prevented by smearing something like black adhesive/silicone onto that part of the frame prior to fitting in order to fill the gap where the seal has been cut?
Thanks in advance for any help/opinions