Chassis treatment

is it worth getting the chassis and bits treated on a 14Y/O disco? or will it already be too far gone? i was thinking about taking it here Before 'n' After - Classic car rustproofing since 1987
unless anyone knows of anywhere better?

from what i hear he is **** and just makes a mess of the job!

£350 + fer that ffs, yer must be stupid, as fer that before and after guy he's a dick by all acounts , as g spot says,

get yer chassis rubbed down at yer leisure, get it ready and do it your self fer oooh around £40 of stuff and yer kno its been put on to good clean chassis not sprayed oevr ****e like his, that axles a slap over job be the looks of it, his website dont sell it to me either

check my other posts on this subject guy's a fooking ****er.

Don't waste your money. Spend it on a welder instead yoiu're going to need it. Disco chassis don't seem to rust too badly it's the bodywork that rots.

ok , tell yer what il do it fer £300

humm ok i only looked at him because his ad's are always in the landy mag. this guy looks good http://www.thewaxworks.net/about_us.html but its a tad far away for me i'd rather have the job done properly and it all injected into the chassis rather then me feckin it up and missing parts plus i dont really have the area to do it

if yer want to do it proper, take it to a tesco car park at night, fill the chassis up with runny wax oil and drive round the parking bays till its sloshed round yer chassis, then they get all the mess

i'd still rather get it done professionally so can get the chassis proper clean before hand and to get it injected in the chassis, i'd like somewhere like the waxworks place as they do inside the doors and the inside of the floor and everythign

306 sam said:

i'd still rather get it done professionally so can get the chassis proper clean before hand and to get it injected in the chassis, i'd like somewhere like the waxworks place as they do inside the doors and the inside of the floor and everythign

Click to expand...

ffs its easy do it yourself you lazy git

maybe so but i don't have any ramps to be able to get under there and jet wash everything and to be able to inject into the chassis, but no worries i'll ask somewhere else

306 sam said:

maybe so but i don't have any ramps to be able to get under there and jet wash everything and to be able to inject into the chassis, but no worries i'll ask somewhere else

Click to expand...

crawl under it like the rest of us do then

its a **** easy job! do it the way i am, strip the entire landy down to just its chassis then you will have enough room to work!

ask pikey to tip the ****er over, ideal time to under seal it then