chassis Help

HI all again i'm looking at spending many hours in the garage this weekend, where to buy and what is the best paint or rust replient (im in Sittingbourne kent). i need to get moving with this now it needs to be back on the road by sept, as got a another project on the why?

Many thanks

On a previous motor I have used a rotary wire brush (one with a threaded hole in the middle) fitted to an angle grinder to take the chassis back and remove the crustie bits then red lead primered the whole lot followed by a good couple of coats of waxoil. All these bits can be purchaced from any decent motor outlet. Unfortunatly I know longer own the vehicle so I cant give you a report on the long term protection.

ok i took it back with a 80 grit paper on a angle grinder knackerin work but it did work then red oxide primered it then hammerite black smooth x2 coats and then 2 coats of waxoyl that was ok and has just had a top up of waxoyl

i shotblasted mine, then sprayed it with wrought iron gate paint