greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
Chassis brake pipe refit advise
- Thread starter greyhair
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,522
- Location
- west wales coast
Looks fine,check it is still ok when body is replaced.
You can get a little bender for a few beer tokens,handy.
You can get a little bender for a few beer tokens,handy.
Last edited:
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
That pipe is actually meant to go under the A-frame crossmember and not over it bud.
I'll try and find some pics. And where do you keep kinking it? Same place every time.
I'll try and find some pics. And where do you keep kinking it? Same place every time.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
That said I don't think that would touch the body as it is, so should be fine.
- Posts
- 11,032
- Location
- North of the Wall
That looks as though it will work. Body isn't going to touch it.
Here are a couple of photos from mine. Let me know if you want any more views. That's all looking very shiny and new - nice job mate.
Here are a couple of photos from mine. Let me know if you want any more views. That's all looking very shiny and new - nice job mate.
greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
Good, I thought it looked ok
greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
That looks as though it will work. Body isn't going to touch it.
Here are a couple of photos from mine. Let me know if you want any more views. That's all looking very shiny and new - nice job mate.
Perfect cheers mate
I have loads of pics missing, just trying to remember where I saved them to
