changing from 300tdi clusters to 200

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

discoboy84

New Member
Posts
537
Location
Ipswich
this is a step by step of what I did, others may do it differently


i started by dropping the dickie seats (6&7) and gaining access to the clusters, i removed my red 300 tdi rear clusters and the temp lights i had put in place of my bumper ones (ripped off my rear bumper off roading ;P)

i then got hold of some cluster wiring plugs
wiresforchange.jpg

and took them apart
wiresforlightchange.jpg


and fitted two wires into my current block that were missing, i pulled the bumper wiring back up from the bumper and connected the wires, (green is indicator and red is tail light) to the plug ignoring the two black wires from the bumper,
rearlightchange.jpg


these are all the pics i had taken will add more, i also have 8 wires left over for adding to your connector if anyone wants some pm me :p






PS use a thin screwdriver to remove the wires from the block (to open the hinged area)
 
Last edited:
Back
Top