chainsaw

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

coz1

Active Member
Posts
396
Location
warwickshire
i'm after a chainsaw(petrol) mainly for cutting firewood/logs,which brand/make can anyone recommend.
what do i look out for
what size should i buy.
anyone got one for sale?
 
i'm after a chainsaw(petrol) mainly for cutting firewood/logs,which brand/make can anyone recommend.
what do i look out for
what size should i buy.
anyone got one for sale?

Real men use a manual saw or an axe. Anybody uses a chainsaw should have a gaylander and be called angie or rupert:D
 
Real men use a manual saw or an axe. Anybody uses a chainsaw should have a gaylander and be called angie or rupert:D

yer that was my attitude untill i got a husky, now i spend hours enjoying the heat given orf from me burner rather than spending hours chopping logs for it
 
yer that was my attitude untill i got a husky, now i spend hours enjoying the heat given orf from me burner rather than spending hours chopping logs for it

You cruel bastid using a dog to chop wood:eek: . I'm reporting you to the rspca
 
justa word of warning about huskies, they are very sensitive to having the correct fuel oil mix

i know this because i have recently wrecked the piston/cylinder and rings of one of mine using just half a tank of neat petrol
 
i got given an old still a while ago that needed a good clean up, i ran out of 2 stroke half way thru a job and put 3 full tanks of neat unleaded thru it in an afternoon and it never missed a beat:D needs a new chain tho as it's angin off a bit and blunt as a sponge :(
 
you can move the bar forward, which'll tighten the chain and sharpen it with the correct size file/tool, where in berks are you, my lawnmower man 'll probably sort it for a tenner knowing him.
 
The Jonsred is a good little saw shares a lot of parts as the husky, and if your logging all day the husky and jonsred are a bit lighter than the sthil, trick we used to do was to get a resonable power saw and drop it to the smallest bar and chain you could get to increase the cut speed, remember if you puttto sharp an angle on the chain teeth you will cut like hell but u will spend most of the day resharpening, likewise not enough slow cut rate, when i did my licence they reackoned ideal was 32/36 deg was about right...
 
Back
Top