Centre Console Side Panels

Datatek · Nov 3, 2009

P38 DHSE Auto

According to RAVE you remove 2 screws and slide the side panel down, so far so good, then it say's "release sprag clips from fascia switch pack"
I can't find the sprag clips, it would help if I knew what I was looking for, so I can't get the side panels off.
Just want to get at the clock as it's 3.5 hours fast and the adjuster button does not work. Bloody annoying but I don't want to break anything in the process of getting at it.
Anyone know the trick

garioch43 · Nov 3, 2009

This might help....

Dash Removal and Replacement (Range Rover 4.0/4.6/p38)

mmaddock · Nov 3, 2009

It is not possible to reach up from the stereo cut-out if you pull the stereo out first? I can't remember how hollow it is in there, but might be worth a try!

Matt

gavbriggs · Nov 3, 2009

brute force, look for the seam, pull in oposige ditections

Datatek · Nov 3, 2009

garioch43 said:
This might help....

Dash Removal and Replacement (Range Rover 4.0/4.6/p38)

Thanks for the link, that page didn't help but a link at the bottom of the page you gave covering blend motor and other work gave a very good description of how it comes apart. Thanks again

Canyon · Nov 3, 2009

you have to remove screws, and then push/slide the panel in the direction of the rear wheels, almost like 45 degrees. There used to be a video on youtube, on how to replace the blend motors which had a video showing how to remove the side console panels.Cant seem to find it right now.

Datatek · Nov 4, 2009

Canyon said:
you have to remove screws, and then push/slide the panel in the direction of the rear wheels, almost like 45 degrees. There used to be a video on youtube, on how to replace the blend motors which had a video showing how to remove the side console panels.Cant seem to find it right now.

The slide to the back is shown in RAVE, no problem with that but the panel will still not come off. Going to try the method shown on Rangerovers.net today

denzil · Nov 4, 2009

hi ifound that if you remove the window switch pack the side panels move back a lot easier !

Datatek · Nov 4, 2009

Following the guide on Rangerovers.net I got the side panel off, the with the LH side of the instrument switch housing unscrewed and the radio removed I was able to fiddle the clock out. Fixing the clock took 5 minutes, it was just the contact for time adjustment was deformed. One more job done!

P38 DUB · Nov 4, 2009

I had trouble gettin the side panels off. I have taken out the fixing screws (2 one under steering an one next to the seat) but the panel doesnt seem to want to move as if it attached under the cubby box thing.

Any help??

Centre Console Side Panels

Datatek

Well-Known Member

garioch43

Active Member

mmaddock

New Member

gavbriggs

Well-Known Member

Datatek

Well-Known Member

Canyon

New Member

Datatek

Well-Known Member

denzil

New Member

Datatek

Well-Known Member

P38 DUB

New Member

Similar threads