joe27979
Well-Known Member
- Posts
- 1,354
- Location
- west Norfolk
Hi chaps - my Midland 98 Plus CB has gone for a shizen.
It worked perfectly in my discovery, I removed it 2 months ago and have now fitted to my series 3 and the unit wont transmit.
I have a healthy 12volt supply, ground planes etc ohm out perfectly with no shorts.
I have no TX power at all on the power meter, SWR doesn't move on key forward or reflection...but the unit changes from RX to TX when I key up. I have power on my output transistor but am getting no RF on my oscillating circuit....this is about as far as my knowledge of this extends.
Any decent rig repair people out there that you can recommend?
It worked perfectly in my discovery, I removed it 2 months ago and have now fitted to my series 3 and the unit wont transmit.
I have a healthy 12volt supply, ground planes etc ohm out perfectly with no shorts.
I have no TX power at all on the power meter, SWR doesn't move on key forward or reflection...but the unit changes from RX to TX when I key up. I have power on my output transistor but am getting no RF on my oscillating circuit....this is about as far as my knowledge of this extends.
Any decent rig repair people out there that you can recommend?