castor adjusted radius arms

The Mad Hat Man · May 17, 2010

How can one tell if the radius arms are castor adjusted radius arms or not?
I assume they are "kinked" in some way? Can that "kink" be measured in some way to identify a castor adjusted from a non-adjusted radius arm?

dollydisco · May 17, 2010

i know the rear trailing arms are kinked if they are radius corrected, fronts im not to sure,but you should be able to tell if they are upgraded!

The Mad Hat Man · May 17, 2010

I got a couple given to me - and I need to check if they are "standard" or not, so need to be able to confirm.

dollydisco · May 17, 2010

upload pictures,ill tell you>

Trewey · May 17, 2010

they aint kinked.
the holes for the bushes are 3 deg (for 2" lift) or 6 deg (for 4" lift) offset on the curve of the hockey stick.

if they're QT ones, they'll have +3 or +6 on them.

dollydisco · May 17, 2010

the REAR trailing arms are

the fronts i,e the radius arms (rears being the trailing arms) will have offset holes in the bushes, hence why i said,upload pictures and ill tell you

castor adjusted radius arms

The Mad Hat Man

Well-Known Member

dollydisco

New Member

The Mad Hat Man

Well-Known Member

dollydisco

New Member

Trewey

Cockernee, Pasty munchin bastid.

dollydisco

New Member

Similar threads