Can't select gear after new clutch fitted! HELP!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Shteve

New Member
Posts
3
Hi all, new to this forum. Hopefully someone can help me out!
Bought a 03 Disco TD5 Commercial about 4 weeks ago and the transfer box went on it, so got another one on and fitted a new clutch, seemed daft not too while box was out. Now when engine is running it won;t go into gear, selects fine when not running. It does drive but you need to start it in gear which feels like bump starting it and you have to hit the right revs to get it into other gears!
Any ideas? Really don't fancy taking box out again!:confused2:
 
how does pedal feel ,may ned more bleeding or you may have fitted clutch plate the wrong way round they do fit different than a first look may say ,did you have to pull box up with the bolts for the last inch
 
Pedal feels perfect, as it should. Clutch plate had gearbox side written on it so thats the way I put it on, biggest bit was to the flywheel. Box slid on great only about 5mm gap.
Thanks
 
You must log in or register to reply here.

Similar threads

P
LT77 reverse gear hard to select
Replies
2
Views
227
patrickr90
P
N
Difficult gear changes when hot.
Replies
3
Views
268
steve2286w
steve2286w
N
Clutch problem unable to change gear
Replies
10
Views
2K
Anaconda
A
Flossie
Lost me clutch, thoughts? Found the fault with a pic.
Replies
19
Views
2K
KISSMYAURA
KISSMYAURA
D
Auto Gears Not engaging properly after front end jackup
Replies
6
Views
599
daviesM
D
Back
Top