- Posts
- 9,105
- Location
- Roaming the UK on assignments
Trivia time.
Can you guess what it is?
I was very impressed with the machining
Can you guess what it is?
I was very impressed with the machining
Fine , but the outlet at 90degrees would not take a dowty washer to allow a good seal.Hyd. fitting, inc “ dowty washer”, splits oil in two directions
Hyd. fitting, inc “ dowty washer”, splits oil in two directions
Fine , but the outlet at 90degrees would not take a dowty washer to allow a good seal.
Cheers
Tapered thread Hydraulic fitting with PTFE....
Not what I was always told.
Cheers
Tapered thread Hydraulic fitting with PTFE....
Not what I was always told.
Cheers
Trivia time.
Can you guess what it is?
View attachment 142851 View attachment 142852
I was very impressed with the machining
Yeah it’s a remote oil pressure t piece so you can fit a pressure sender and a pressure switch in the same line. I have he exact same thing except mine is on a bit of braided pipe so I could mount it up out of the way
Ooh! I like that idea, might do that myself as it will get them higher up out of harms way, think there could be space enough to mount it on the bulk head?
Yeah probably, I mounted mine on the clutch cylinder housing next to the brake servo
I've got the same gear. Got mine from Deemon Tweeks, but haven't fitted it yet.Yeah it’s a remote oil pressure t piece so you can fit a pressure sender and a pressure switch in the same line. I have he exact same thing except mine is on a bit of braided pipe so I could mount it up out of the way
I've got the same gear. Got mine from Deemon Tweeks, but haven't fitted it yet.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!