Can you guess what it is?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
dieseldog69

dieseldog69

Well-Known Member
LZIR Despatch Agent
Posts
9,105
Location
Roaming the UK on assignments
Trivia time.

Can you guess what it is?

IMG_20180221_190328.jpg
IMG_20180221_190316.jpg


I was very impressed with the machining :)
 
flat said:
Yeah it’s a remote oil pressure t piece so you can fit a pressure sender and a pressure switch in the same line. I have he exact same thing except mine is on a bit of braided pipe so I could mount it up out of the way
Click to expand...

Ooh! I like that idea, might do that myself as it will get them higher up out of harms way, think there could be space enough to mount it on the bulk head?
 
flat said:
Yeah probably, I mounted mine on the clutch cylinder housing next to the brake servo
Click to expand...

What pipe did you use Ed? Did you get one made up or was it an off the shelf item?

I have a spare stainless braided brake pipe in my stores with the right thread one end but just need a fe/fe union and it's golden I think?
 
I got a specific oil one from demon tweeks or somewhere.

Only thing worth mentioning is my gauge sender and pressure sender needs to be earthed to work - the cable/pipe stops that earth from occurring where it is threaded in the oil filter housing so I just mounted the T piece on a small metal bracket that was earthed and it worked a treat
 
I've been on to HypeHose who have all the bits I need and will go over to collect tomorrow, they were confident that the PTFE lined brake hose would work but obviously wouldn't give it a definitive yes for obvious reasons.

The fella said that they could do a crimped braided line if that was what I wanted or a nylon line with compression fittings, inserts and olives, entirely up to me and my budget to decide.

Might as well go for the custom crimped line me thinks, gonna pop out an have a measure up to see exactly where I want to put it on the bulkhead in a mo.
 
flat said:
Yeah it’s a remote oil pressure t piece so you can fit a pressure sender and a pressure switch in the same line. I have he exact same thing except mine is on a bit of braided pipe so I could mount it up out of the way
Click to expand...
I've got the same gear. Got mine from Deemon Tweeks, but haven't fitted it yet. :rolleyes:
 
You must log in or register to reply here.

Similar threads

BikerB
Cleaning out waterways
Replies
4
Views
1K
BikerB
BikerB
J
Disco 4 (LR4) 2010 D4 EPB stuck and fuel gauge at zero. Engine cuts out.
Replies
16
Views
867
jimseng
J
P
Freelander 1 Joying Android head unit to FL1 steering wheel controls?
Replies
11
Views
1K
J_D
J_D
feyniriel
If you start feeling irregular vibration that comes and goes on P38, it could be the EAS compressor!
Replies
6
Views
884
Grrrrrr
Grrrrrr
B
LCM help
Replies
7
Views
926
billyboy85
B
Back
Top