Can anyone identify what these are for...?

When I picked up my Defender, there was a load of stuff in the back (spare seats, various bolts, spare seatbelts, etc). Amongst them, were these:



Anyone have any idea what they're for? The plate holes don't seem to line up with anything in the back, nor on the outside of the Landy.

Any ideas?

They look like something someone has had made up. They dont look strong enough to be used as a step or slider. Maybe a grab handle of some sort?

csw rear seat belt brace bars me thinks

drewster said:

csw rear seat belt brace bars me thinks

Click to expand...

I agree's with drewster

drewster said:

csw rear seat belt brace bars me thinks

Click to expand...

Never heard of them, how do they fit?

martin1512 said:

Never heard of them, how do they fit?

Click to expand...

That was my next question!

I've not got round to putting the rear (facing) seats back in yet, so just as well then!

as above. these are used for side (bench) seats though so wont work with forward facing units if that is what you are fitting.

G

Yes, I'm looking to refit the individual side seats that face inwards.

I've googled for pictures of them installed, but can't seem to find one that shows these bars.

Thanks for everyone's help so far!

Frosty555 said:

Yes, I'm looking to refit the individual side seats that face inwards.

I've googled for pictures of them installed, but can't seem to find one that shows these bars.

Thanks for everyone's help so far!

Click to expand...

This any help?

Anchorage-Rear Inward Facing Seats ??? LandRover Defender 1987-2006, Seats





.

Mine are the same as the one labelled 21 in the diagram.

Excellent - thanks very much for everyone's help. Will see where these bolt in this week.

What little I can offer, is when I had my rear cross member replaced, the outer edge bolts went through the bottom end of the bracket. I.e. the bottem end of the bracket is bolted firmly to your rear cross member and is visible at the bottom or the rear arch behind the rear wheel.

At a guess the top bolts are near the central part of the rear cab, probably visible behind the covers to the rear lights and upper rear trim covers, from inside the rear of the vehicle.

Edit: Hmmm. Just had a look in the back of me CSW. Think I'm right about linking to the rear cross member, but I have tubular rail then running behind where the seats go, along the back top of the box section. The lap belts for the seats bolt onto this rail.