caliper wrong size??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gR@HaM

Well-Known Member
Posts
1,095
Location
Cheshire
Bought a couple of second hand rear calipers, gave 'em a clean up and lick of paint and was quite please with the results.. until yesterday. The offside caliper won't fit - bolt holes are too small, maybe from a 200??
Anyone else had this problem? Am thinking of having a go at boring them out but guess I would need a strong drill bit as the caliper will be very tough..
 
real easy to do
early 200 disco and classic rr had 3/8 bolts not 10mm to fit then simply drill out the mounting holes with 10 mm drill bit
pads on the rear are the same so if caliper looks ok and no leaks just drill the holes
cheers gaz
 
real easy to do
early 200 disco and classic rr had 3/8 bolts not 10mm to fit then simply drill out the mounting holes with 10 mm drill bit
pads on the rear are the same so if caliper looks ok and no leaks just drill the holes
cheers gaz

Fantastic! Just the answer I was looking for.
Will I need to use a special drill bit or just a regular steel one? The calipers are pretty solid so will take something to cut through..
Thanks
 
Back
Top