dieselnutjob
New Member
- Posts
- 6
Hi
I have bought a T4 part number DTC4002B on ebay along with a pile of CDs. I have managed to install the software and it appears to work up to the point that it complains about missing cables, so I guess that the software is talking to the 4002B base unit thing okay.
It came with a DTC0007A extension cable, a DTC0017A which has a rectangular 4 pin green plug, a cable with a green 16 pin plug, and a cable with a Rover 3 pin cable as used on MEMS1.6 ECUs.
I would really like to try this thing out to make sure that it works but that I ideally need a blue cable.
The special plugs that go into the base unit are available from RS components and I have already ordered some so I should have them tomorrow, and I have some 16 pin plugs around somewhere (I have a breakout box anyway).
Please can anyone tell me the pinout for any of the cables (ideally a blue one)?
I have a MEMS1.6 ECU that I could try it out with (from a Rover 800) but none of the CDs seem to cover a Rover that old, so if someone can help with that it would also be helpful.
thanks
I have bought a T4 part number DTC4002B on ebay along with a pile of CDs. I have managed to install the software and it appears to work up to the point that it complains about missing cables, so I guess that the software is talking to the 4002B base unit thing okay.
It came with a DTC0007A extension cable, a DTC0017A which has a rectangular 4 pin green plug, a cable with a green 16 pin plug, and a cable with a Rover 3 pin cable as used on MEMS1.6 ECUs.
I would really like to try this thing out to make sure that it works but that I ideally need a blue cable.
The special plugs that go into the base unit are available from RS components and I have already ordered some so I should have them tomorrow, and I have some 16 pin plugs around somewhere (I have a breakout box anyway).
Please can anyone tell me the pinout for any of the cables (ideally a blue one)?
I have a MEMS1.6 ECU that I could try it out with (from a Rover 800) but none of the CDs seem to cover a Rover that old, so if someone can help with that it would also be helpful.
thanks
