broken door lock

Hello
We've a 2010 110 SW, One of the passenger door locks is broken, The thing which you push down/up to lock/unlock is broken and fallen into the door. The door is permanently unlocked ... In the short term, I'm like to get it perm locked which presumably can be done if I remove inside door panel? Anyone know how to remove inside door panel without breaking anything? Cheers.

Wont the key lock it?

No, only the front doors are locked with the key :-/

My drivers lock has just stopped working. There is no resistance when using the key. I can't lock it or unlock it from the outside but it locks fine from the inside. My door latches are simple military type ones. I don't know if the normal style ones are the same, maybe with pushrods added? I've ordered one of these springs - hopefully that will fix it. Thought I would link it in case it helps you: http://www.ebay.co.uk/itm/Land-Rove...hash=item2eb6813c6e:m:m6tMnK_qpFnSi6xcw2yDEXA

you should be able to prise off the door card without breaking too much () and then check the connections and/or temporarily lock it until you get a new catch

Well I repaired mine today using that kit and it works perfectly again. It's got a much more positive click when locking than it has in my ownership.
Lock is dated 1989 so good service if all it needs is a spring in that time. Only took about half an hour.

cheers for replies. I'll try prising off door card