matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Breaking a 300tdi Discovery All Parts Available
- Thread starter matthew2riches
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
treloarfarm
New Member
- Posts
- 70
- Location
- Cornwall
My item arrived today many thanks Matt....
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Bump...
Still bits left, will be weighing in body will any remainder in on 31st Oct.
Interior trim panels still here, various outer panels, grill, front bumper end caps, etc...
Still bits left, will be weighing in body will any remainder in on 31st Oct.
Interior trim panels still here, various outer panels, grill, front bumper end caps, etc...
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Have you got any of the headling grey plastic stud fasteners with the large flat head??
Could do with 4 for my headlining.
Cheers
Could do with 4 for my headlining.
Cheers
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Good question. I'll have a look.
alexdon
New Member
- Posts
- 329
- Location
- Hampshire - Havant aclew
Has it got wheel spacers?
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
alexdon
New Member
- Posts
- 329
- Location
- Hampshire - Havant aclew
Oh well! Sometimes it is better to travel with hope than to arriveSadly not, it was a standard road car
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
All parts bar one are showing now as confirmed delivered. Cheers!
A few more bits available. Another disco coming in mid week for dismantling. Will let you know the score.
I know it has a lovely set of Boost alloys on!!
A few more bits available. Another disco coming in mid week for dismantling. Will let you know the score.
I know it has a lovely set of Boost alloys on!!
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Any of the headlining plastic fastner thingy's?????
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Ok cheers anyway mate.
I am looking for a defender manual tilt/removable sunroof if you know of any up for sale.
Would need the frame and the glass for a project
I am looking for a defender manual tilt/removable sunroof if you know of any up for sale.
Would need the frame and the glass for a project
- Posts
- 83,230
- Location
- Embasinga stocæ
Ok cheers anyway mate.
I am looking for a defender manual tilt/removable sunroof if you know of any up for sale.
Would need the frame and the glass for a project
I got two disco ones, if they are suitable for ya.
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
I'm thinking of retro fitting a defender 1 as a shooting hatch as they look the easiest to fit?? Would have to cut a hole in the roof to fit it too
jonny mac
Active Member
- Posts
- 239
- Location
- north wales
Hi matt do you have anything left? I need the rear seat belt mounts (bench seat) which attach to the chassis also the torx bolts which go through boot floor. I could also do with some rear quarter panel window seals for a 5 door. Thanks
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Will probably have all of that. Pm'ed.
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Hi mate just seen the last post about window seals - i'm after some rear quarter panel window seals and a rear window seal (disco 5 door) if you have got any in good condition (after you have sorted out the guy above)
Cheers
Cheers
Big Stu 12
Well-Known Member
- Posts
- 1,940
- Location
- Suffolk & Essex
I am down our workshop with Matt later tonight, i'll get that checked as well, just in case he don't see this post.
Snifflebag
Active Member
- Posts
- 720
- Location
- NE Hants
Would be interested in rear door card (I'm after the one with a speaker pod, though I don't think I need the speakers) plus rear door grab handle if they're available...
Similar threads
