Breaking 1993 3 door

Most parts left except engine/gearbox. Good chassis and straight body panels. Complete interior. Will sell as rolling body if anyone is interested. I would have MOT'd for another year but the idea was to use for Range Rover project and I need to get it finished. Lincolnshire.

hello mate have you got a 24 spline hub assembley and half shaft

I have hubs and halfshafts, couldn't tell you if 10 or 24 spline. Welcome to look see or tell me how to check?

if you take the bolts out of the center (in the middle of the wheel ) and pull the shaft out (alittle oil may spill) the spline count is the number of splines on the end of that shaft , lots of splines will be a 24 , large spaced splines will be 10/12

thanks

stewart

Hi Stewart, sorry it's taken so long to get back to you, work etc.. I have decided to not break the hubs as I would rather sell chassis and running gear complete. I just don't have the space or facilities to leave stuff unsold or immovable and I will probably start a 100 inch project if left with the chassis. You are probably better off trying a commercial breaker. I have got the number of a Farmer in Cambridgeshire who has 5 commercial 300tdi stuck in the back of his tractor shed for spares.

Hi
Do you have the rear indicators in the bumper, both sides?
Thanks
Gary

exjay9 said:

Hi
Do you have the rear indicators in the bumper, both sides?
Thanks
Gary

Click to expand...

93 disco's didn't have bumper lights. I has a set if yu want em though.. out of a 98 300tdi

Ere Redhand, have you got a o/s/f central locking motor for a 300tdi you want to sell?

Hi Pal is the shell in good condition? ie signs of rust etc under it. in need of a donor

hey do u still have both front lights and indicators, grill, rad, and the plastic bit that runs underthe light to the wing? i had a fight with some thick ice and lost lol and if u do are u able to send them?
cheers daz

have you got the rear bumper? and do if it will fit a 300tdi