brave new world & RR Classic 3.9 Vogue SE

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ashbash2403

New Member
Posts
79
Location
Walsall area West Midlands
Bought a RR classic just before I jetted off to Italy for a week and now just starting to pay it some attention...

Not sure if & what has been done to is and just getting up to speed with what works and what does not (mainly electrical) :)

1. Clock was working now not.
2. Oil temp gauge not working
3. Fuel Gauge not above halfway even though full tank
4. Both electic seats now not moving
5. Stereo is a mass of wires some of which just fire up speakers without even a stereo.
6. bit of light rust around the rear plate lights
7. Under Bonnet courtesy light not working (disaster) :D
8. NS rear door does not open from inside.

Will put up a few pics its a Beluga Black (if I found the right code).

Looking forward to tinkering (or at least pointing my Lany man at the right areas)...
 

Attachments

  • P1000546.jpg
    P1000546.jpg
    251.1 KB · Views: 424
  • P1000551.jpg
    P1000551.jpg
    249.3 KB · Views: 180
  • P1000548.jpg
    P1000548.jpg
    253.7 KB · Views: 306
  • P1000547.jpg
    P1000547.jpg
    251.3 KB · Views: 311
  • P1000553.jpg
    P1000553.jpg
    223.3 KB · Views: 183
  • P1000552.jpg
    P1000552.jpg
    233.5 KB · Views: 214
  • P1000556.jpg
    P1000556.jpg
    251.3 KB · Views: 208
Ah, the clock is probably just talking a little well deserved holiday. It works all the time, you know.:D Mine stopped working for over a week and one day started up again ten minutes off the correct time!

The seat controllers are full of little bits that get contaminated by dust and dirt. I tried the simple fix of spraying contact cleaner into any appropriate looking openings in the controls after taking off the the top cover. It worked.

You should pop over to Rangie forum, where you will find many answers to many questions.....which will probably lead to more questions!
 
Back
Top