Brake Pads

Ive just changed the Front Brake Pads on L322 Range Rover

Ive Still got "Check Brake Pads" warning on Display Screen do you have to get the Dealer to Reset.

Also I took the Battery lead off for 30 Min thinking that might Reset it And now Ive got message " Air Susp Inactive " Bloody new Technology!!!

Anyone got any ideas?

Did you change the sensor lead as well ? You need to renew this then stick it on testbook where the fault will be stored under,"vehicle exterior lighting". There is supposed to be a way to clear it without testbook but I never managed to get it to work - now I've forgotten what it was and just use testbook anyway ! You might find the air sus fault will go away on its own after a few key on/off cycles,if not get it cleared when you have the pad warning job done.

to clear the fault without T4 keep turning the ignition on and off (about 20 times or so)

Turn it on for a few secs and then off, keep doing that and it will eventually clear


to clear air suspesion fault, start engine and turn steering lock to lock to calibrate the steering sensor

clutchdust said:

to clear the fault without T4 keep turning the ignition on and off (about 20 times or so)

Turn it on for a few secs and then off, keep doing that and it will eventually clear


to clear air suspesion fault, start engine and turn steering lock to lock to calibrate the steering sensor

Click to expand...

couldnt have put it better myself

Neither seems to have worked
Going to book it in to the Dealer

Thanks for Trying