Brake lights

Centre rear brake light working other 2 are not checked holders bulbs all ok could it be a joint, where can i get a schematic diagram?
Freelander 2002
Thanks

You do know it's the ones in the bumper that are the brake lights?

Yip

mjrimmer said:

You do know it's the ones in the bumper that are the brake lights?

Click to expand...

Derrrrr.... Lol

Most likely high resistance connection. Use a meter to check for 12 volt at connector with bulb removed, ignition on and brake pedal pressed. Alternatively, with ignition off, remove bulb and use a small, sharp screwdriver to scrape the bulb holder connection and the tip of the bulb; replace and try again. The fact that the high level bulb is working indicates that the circuitry up to the rear of the vehicle is probably ok. Hope this helps, it worked for me.

Andy

Wool have another check. Ta

It was a connection Andy as you said so thanks to all.