Brake Calipers

Hi everyone

I need to replace my calipers on my 110 as they are pretty rotten but not sure which part numbers to order can anyone help. the old calipers are AP and have casting numbers of 3247-683c, 3247-682c,3247-681c,3247-684c they are non vented. the only reson i ask is that i have ordered parts based on the chassis number before and the parts recieved have been different.

Any help would be much appreciated

Details of your Landy would be more helpful - and front or backs.

discomania said:

Details of your Landy would be more helpful - and front or backs.

Click to expand...

wot he said.

year and engine type would be a start

Need the year as well as they changed them for larger pistons around early 1990s.
Hello btw:welcome2:

Thanks for the replies the calipers are for the front axle , it is a K reg 110 200tdi CSW with a salisbury rear drum brake axle. from looking at a few websites there seem to be 3 options, up to KA******** , from LA******* and from LA******** with vented disks, i know they arent the later as it doesnt have vented disks, and I know they should be the ones upto the KA***** ones but when I ordered a replacement swivel seal cover (the metal plate thingy that holds the swivel seal in place) for up to KA****** it didnt fit as there where too many bolt holes and they where in the wrong place. the swivel seal plate only had 6 holes. Is it possible it has the later hubs. Another question would either set fit as i am needing a pair would it matter.