Bonnet lettering

My P38 has had the bonnet and boot RANGE ROVER lettering replaced at some point and it looks like it was done rather 'freehand' - the spacing is not quite right, and it's not quite straight. Apart from that, it's a first class job

Anyway, is the exact positioning of the lettering documented anywhere? I'm guessing that it may well not be, because of course they come as one complete strip from the dealer, but just in case.

When I replaced mine they came like you say on a strip and you just got it level and the spacing was already done for you...

If you get it from eBay then it comes spaced correctly. You just pull the backing paper off (and leave the front mounted guide in place) then stick them down. Then peel off the front guide and it's done!

domino said:

If you get it from eBay then it comes spaced correctly. You just pull the backing paper off (and leave the front mounted guide in place) then stick them down. Then peel off the front guide and it's done!

Click to expand...

Oh, I know. I was hoping to try and stick the ones I have in the right place rather than buy a new set just to get the template.

It's not expensive so might as well

iv just orderd a new set for mine should be here in a day or so

biketeacherdave said:

iv just orderd a new set for mine should be here in a day or so

Click to expand...

Are they aftermarket ones with a template? If so, don't throw the template away afterwards...