Bonnet cable

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Any tips or how to?

It's pretty easy.

Secure a length of strong twine (I'd used insulation tape) to the old cable, so that as the cable is pulled through, the twine follows the same route. Then secure the new cable to the twine using the same method, and draw the new cable back through.

It's not that difficult, but is easier if you have a helper.

;)
 
It's pretty easy.

Secure a length of strong twine (I'd used insulation tape) to the old cable, so that as the cable is pulled through, the twine follows the same route. Then secure the new cable to the twine using the same method, and draw the new cable back through.

It's not that difficult, but is easier if you have a helper.

;)
Thanks, thought it was pretty straight forward.
 
Back
Top