Freelander 1 Bolts that attach VCU mounts to body

Geodark

Active Member

Posts

224

• Jun 25, 2019

• #1

Anyone fancy saving me a bit of time... Need to know what the bolts are that attach the VCU mounts to the body - need to get some ordered for the weekend so I can refit the VCU and props (new VCU, mounts and UJs) but forgot to measure the bolt so I could order them! had to cut and grind one of them to get the VCU off - so might as well stick 4 new ones on.

Ta very muchly

 

Nodge68

Well-Known Member

Posts

32,954

Location

Cornwall

• Jun 25, 2019

• #2

They're 10mm headed flange bolts, which have a 8mm X 25mm thread IIRC. Torque setting is 28Nm, again IIRC.

 

G

guineafowl21

Well-Known Member

Posts

3,352

Location

Inverness

• Jun 25, 2019

• #3

Nodge68 said:

They're 10mm headed flange bolts,

Click to expand...

Horrible things. Mine had to be extracted with Irwin grip sockets. They got their nasty little rounded heads ground circular and proper-sized 13mm nuts welded on top.

Tip: copper grease the threads.

 

Nodge68

Well-Known Member

Posts

32,954

Location

Cornwall

• Jun 26, 2019

• #4

guineafowl21 said:

Horrible things. Mine had to be extracted with Irwin grip sockets. They got their nasty little rounded heads ground circular and proper-sized 13mm nuts welded on top.

Click to expand...

Interestingly I've never had them seize up. I've only ever known them to come out easily, as long as a 6 sided socket is used. They're supposed to be torqued to 28Nm, so shouldn't be difficult to remove. These flange bolts are used on all modern vehicles now, as it make production line assembly faster.

 

Geodark

Active Member

Posts

224

• Jun 26, 2019

• #5

yeah, have ordered a stud extractor to see if I can get this remaining bit out. Like the look of those irwin sockets though - might have to get a set ordered.