bolts for rear tub

chris07 · Jan 18, 2011

hi evrayone i have just fited a new haf chassis to my s3 88" and am pouting it all back to gether but a have lost all the nuts and bolts that hold the tub on to the chassis can enayone tel me wot size thay should be

thanks chris

MLangford2 · Jan 18, 2011

For rear tub to rear cross member;

Part No: S2-255227
Bolt rear body 5/16 unf x 7/8

But for the driver side front of the tub, you need a special backing plate that you rivet to the body of the tub, so you don't need to get to the nuts with a spanner with the fuel tank on

Part number; 332451

Hope this helps..by the way - i'd try and get stainless bolts for the rear cross member brakets

MLangford2 · Jan 18, 2011

Just to add - Land Rover Body Fastener Kits, Spares, Land Rover Parts - good for all fastnings.

Also realised put one to many winks in that last reply. Oh dear.

Matt

chris07 · Jan 18, 2011

thats grate thanks do you no wot that is in mm as we onlay have metric nuts and bolts at work
an wot web site did you get the part no from

thanks chris

MLangford2 · Jan 18, 2011

Not 100% sure, but think (if maths is right), thats about 8mm x 23mm.

From the same website I put underneath.

Matt

chris07 · Jan 18, 2011

thanks for that mat al get sum m8 x 25mm bolts

bolts for rear tub

chris07

Active Member

MLangford2

New Member

MLangford2

New Member

chris07

Active Member

MLangford2

New Member

chris07

Active Member

Similar threads