Bolt size for 110 fuel tank mounting?

farmershort said:

Hi all,

Another irritating thread/diameter question.

The holes in the rear x member seem to be about m9... That can't be right can it? I assume the front of the tank is mounting in the small box welded to the bottom of the next xmember.

Anyone know what lengths they are supposed to be?

Thanks

Adam

Click to expand...

farmershort said:

Hi all,

Another irritating thread/diameter question.

The holes in the rear x member seem to be about m9... That can't be right can it? I assume the front of the tank is mounting in the small box welded to the bottom of the next xmember.

Anyone know what lengths they are supposed to be?

Thanks

Adam

Click to expand...

jamesmartin said:

rear tank mountings are m8 front m10

Click to expand...

Carrington224 said:

James mate, sorry but you surpass your self in boring knowledge, if only yer brain power could be put to good use but at least you've helped farmer****e.

Click to expand...

jamesmartin said:

its not boring if you need to know

Click to expand...

Carrington224 said:

James mate, sorry but you surpass your self in boring knowledge, if only yer brain power could be put to good use but at least you've helped farmershite.

Click to expand...

Carrington224 said:

James mate, sorry but you surpass your self in boring knowledge, if only yer brain power could be put to good use but at least you've helped farmershite.

Click to expand...

Speckydude said:

http://www.how-to-waste-your-time.com/

Click to expand...

farmershort said:

Ignore my last post. I misread your answer James... Not helped by the hecklers.

An m9 tap fits in the holes at the rear, so they can't be m8. I'll have more or an investigation today.

Click to expand...

jamesmartin said:

theyve been stripped or are non standard

Click to expand...

Speckydude said:

Could have been replaced - not unheard of, as they do get in a state

Click to expand...

farmershort said:

This is new Richards chassis remember... I'm wondering if it's m10 with some galv in it... I'll try the m10 tap gently tomorrow.

Click to expand...