Body lift

ash0098 · Dec 4, 2014

I've tried having a look around but haven't really found what I'm looking for.

Does anybody know the measurements of a body mount. Ie circumference and what size hole I would need to drill.

Also how many mounting points on the disco one, think it's about 12 but I don't know.

Gonna make a set at work.

Cheers

Paulmitchell1984 · Dec 6, 2014

need to be 2 inch high (obv), diameter is same as the rubber mounts that are currently on, at a guess approx 2-3", hole to fit m10 bolts (think mine were m10 anway), and theres 10 mounts,

2 next to rad
4 on sills (2 front 2 back)
2 at back

cant for life of me think where other 2 are, sure its at back of front arch

you will also need seatbelt extensions, 2 extensions for the gearbox tunnel rad mount extensions (brake lines obv) and depending which steering linkage ou have poss need an older version, think 200tdis had te right one

dieseldog69 · Dec 6, 2014

As replied in the same thread elsewhere

You have numerous mounting points and also a couple of locators that get completely overlooked!!

2x front panel located under each light box

2x front of bulkhead

2x front of sills

2x mid-way along the transmission tunnel(roughly either side of the hand brake)**

2x back of sills

2x boot floor(these are also the seat belt mountings for the back seats)**

2x rear body crossmember

The bushes are roughly 60mm across and have a locating step on them of 27mm and the bolts are 7/16UNF, the mountings marked ** are different as they are "eye" bolts that allow pivoting and bushings so you get to discount 4 of the 14, but these still need to be lengthened.

Any feed back in either thread would be great, lets us know if we are helping or not.

ash0098 · Dec 9, 2014

Thanks. Massive help.

Body lift

ash0098

Member

Paulmitchell1984

Well-Known Member

dieseldog69

Well-Known Member

ash0098

Member

Similar threads