Body lift issue?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
When I done mine I have to lengthen the shaft using the bit where the bolts are that aren't meant to come undone. I took those out and used normal bolts, there's a lip on the very end of the shaft that stops it sliding out I filed that lip off and slid in out a bit further and that was enough if you can understand that lol
 
Stenninski said:
When I done mine I have to lengthen the shaft using the bit where the bolts are that aren't meant to come undone. I took those out and used normal bolts, there's a lip on the very end of the shaft that stops it sliding out I filed that lip off and slid in out a bit further and that was enough if you can understand that lol
Click to expand...

It does make sense :) was sort of thinking the same thing earlier but wasnt sure as to whether there would be enough spline left if you know what i mean lol
How long have you been running your lift?
 
About six months now and it's been fine you need to slide it out of the bit where the security screws are though. I tried it on the spline part and they was just too loose
 
Stenninski said:
About six months now and it's been fine you need to slide it out of the bit where the security screws are though. I tried it on the spline part and they was just too loose
Click to expand...

Ah those screws i aint touching as there supposed to break in the event of an accident so you dont get impaled by your steering shaft. Will come up witb something. :confused: i hope :rolleyes:

wiltshire landyman said:
when we did mine 2" body lift we just undone all the steering ujs and allowed shaft to move and then tightened them all bk up ive had no probs
Click to expand...

Tis the same as what i did except mine seems too short? :(

wiltshire landyman said:
if ya want rob I can pop out sometime with mine and we can compare/have a look and generally drink coffee and scratch heads if ya like :)
Click to expand...

Can do mate the kettle is always on here;) probably spend more time brewing up and smoking than anything else:tea::p plus i wouldn't mind seeing your disco in the flesh :)
 
robbh said:
Ah those screws i aint touching as there supposed to break in the event of an accident so you dont get impaled by your steering shaft. Will come up witb something. :confused: i hope :rolleyes:



Tis the same as what i did except mine seems too short? :(



Can do mate the kettle is always on here;) probably spend more time brewing up and smoking than anything else:tea::p plus i wouldn't mind seeing your disco in the flesh :)
Click to expand...
sounds gd just gotta fix it first bloody cambelt snapped again today:mad:
 
ayup mate, did you have any joy with the steering shaft, ive just done a 2 inch lift on mine and its about 10mm too short its started on the spline just not enough:mad:, too start with i just slackened off the bolts but it was stretching the rubber donut thingy, any help will be much appreciated cheers :)
 
not sure what the OP found, but when i did mine after abit of investigation there are 2 tyopes of steering shaft, ones is longer than the other..(cant see pics to tell you if its wrong one as im at work)
 
thanks, do you no if both shafts were off a disco or was one off anther land rover like a defender, i hope there is an easy solution because i dont want to mess about with spacing the shaft in one way or another would be nice to just fit a longer splined uj, cheers rob
 
i think it was from a disco, just had a look on ma phone, thats a round one (short one) the one i have is more angular almost diamond shape, il try to remember to take a pic tomoz
 
yeah thats the one ive got but there is a square one aswell like you say so i will have to try and get my hands on one thanks:)
 
You must log in or register to reply here.

Similar threads

L
2" LIFT FOR EXISTING SPRING CONVERSION
Replies
3
Views
309
Stanleysteamer
Stanleysteamer
Cartercustom
Lift blocks on air
Replies
3
Views
589
Royston 90
R
Bushcrusher
Adding 1" block to 2" body lift blocks
Replies
1
Views
375
Hicap phill
H
Joebur123
P38 spring options
2
Replies
31
Views
2K
Grrrrrr
Grrrrrr
D
Offset rims and tyres
Replies
1
Views
940
Nodge68
Nodge68
Back
Top